The 22 inch electric hedge trimmer is an important tool for trimming and finishing hedges, and it is necessary to keep the blade sharp and in normal working condition during use. The installation of the blade is one of the key steps to ensure the normal operation of the hedge machine. The following is a detailed guide to installing the 22-inch electric hedge trimmer blade. If you do not know how to install the blade, you may wish to follow the Xiaobian to learn how to install the blade next time you can do it.

1. Prepare

The 22 inch electric hedge trimmer should be turned off and completely stopped before blade installation begins. To be safe, remove the ignition plug or disconnect the ignition wire. You should also wear safety gloves and goggles.

2. Confirm the blade model and specifications

Before blade installation, ensure that the selected blade matches the model and specifications of the hedge machine. Different models of hedge machines may require different types and sizes of blades. Consult the user manual or relevant information of the hedge machine to confirm the blade model and specification to ensure the accuracy of installation.

3. Locate the blade installation position

On the knife holder of the hedge machine, there will usually be one or more places to install the blade. Use the manual or the signage on the hedge machine to determine the correct blade installation location. Ensure that the 22-inch electric hedge trimmer blade is mounted in the correct orientation to ensure that it can effectively trim the hedge while in operation.

4. Remove the old blade

If an old blade is already installed on the hedge machine, it needs to be removed first. Usually, the blade retaining bolt or nut needs to be loosened using the appropriate tool. When removing the old blade, pay attention to the position of the bolts and nuts for reference when installing the new blade.

5. Clean the installation position of the knife holder and blade

Before installing a new blade, ensure that the tool holder and blade mounting location are clean. Remove any dirt, debris, or coating that may be present to ensure that the new blade is properly installed and tightly secured to the base.

6. Install the new blade

Install the new blade correctly on the base. Make sure the edge of the 22-inch electric hedge trimmer blade is facing in the correct direction, usually towards the side of the hedge. Place the blade by hand according to the position indicated on the knife holder, and then tighten it with bolts or nuts. Use the appropriate torque tool to ensure that the blade is firmly attached to the base, but also to avoid excessive tightening that can cause damage.

7. Adjust the blade position

After installing the new blade, make final adjustments. Ensure that the alignment between the blade and the knife holder is accurate to avoid collision between the blade and other parts of the hedge machine. If the hedge machine provides the function of blade adjustment, make fine adjustments as needed.

22 inch electric hedge trimmer https://www.keylead.cn/What-is-a-22inch-electric-hedge-trimmer.html