The main function of the planetary geared motor is to reduce the speed and increase the output torque at the same time. The torque output ratio is multiplied by the motor output and the reduction ratio, but attention should be paid not to exceed the rated torque of the reducer. Widely used in industrial fields with medium precision. Such as: printing machine tools, flame cutting, laser cutting, CNC machine tools, tool machinery, food packaging, automation industries. In aerospace, semiconductor equipment, medical equipment, robots, manipulators, communication equipment, pharmaceutical equipment, printing equipment, packaging machinery, textile machinery, CNC machine tools, CNC pipe bending machines, parking equipment, measuring equipment, machine tools, precision monitoring systems, vehicle industry, automatic control systems and other industries.

How to install the planetary gear motor correctly?

The correct installation, use and maintenance of the planetary geared motor is an important link to ensure the normal operation of mechanical equipment. Therefore, when installing the planetary reducer, please be sure to assemble and use it in strict accordance with the following installation and use related matters.

1. Before installation, confirm whether the motor and reducer are intact, and strictly check whether the dimensions of the parts connected to the motor and reducer match. Here are the dimensions and matching tolerances of the positioning boss of the motor, the input shaft and the groove of the reducer.

2. Unscrew the screw on the dust-proof hole outside the flange of the reducer, adjust the PCS system clamping ring to align the side hole with the dust-proof hole, insert the inner hexagon and tighten. After that, remove the motor shaft key.

3. Connect the motor with the reducer naturally. When connecting, it must be ensured that the concentricity of the output shaft of the reducer is consistent with that of the input shaft of the motor, and that the outer flanges of the two are parallel. If the centrality is inconsistent, it will cause the motor shaft to break or the gear of the reducer to wear.

In addition, the following two points should be paid attention to during installation:

1. During installation, it is strictly forbidden to hit with a hammer to prevent excessive axial force or radial force from damaging the bearing or gear. Be sure to tighten the mounting bolts before tightening the force bolts. Before installation, wipe off the anti-rust oil on the motor input shaft, positioning boss and connection parts of the reducer with gasoline or zinc-sodium water. Its purpose is to ensure the tightness of the connection and the flexibility of operation, and to prevent unnecessary wear and tear.

2. Before the motor is connected to the reducer, the keyway of the motor shaft should be perpendicular to the tightening bolt. In order to ensure uniform force, first screw on the mounting bolts at any diagonal position, but do not tighten them, then screw on the other two diagonal mounting bolts, and finally tighten the four mounting bolts one by one. Finally, tighten the tension bolts. All tightening bolts need to be fixed and checked with a torque wrench according to the marked fixed torque data.

Planetary gear motor supplier - Dongzheng Motor

If you are looking for planetary gear motor suppliers, please choose Dongzheng Motor, we are a trustworthy planetary gear motors manufacturer.

Dongzheng Motor specializes in the production of geared motors and gearboxes, the main products are DC gear motors, planetary gear motors, worm gear motors and micro reducers, etc. And widely used in service robots, medical equipment, financial apparatus, intelligent office equipment, solar tracker systems, rehabilitation and health equipment, automatic doors, etc. Our products are exported to the United States, Europe, Israel, Korea, Japan, Taiwan and other countries and regions. If you wholesale planetary gear motors in bulk, please contact us.