Advantages of cooling wire tube condenser 1. Solve the problem of corrosion of dissimilar metals in contact with each other 2. The pipe of the silk tube condenser is bent and formed from the beginning to the end, the system flow resistance is smaller, and it is more conducive to the system to swim 3. Easy to clean, while the external drag coefficient is smaller 4. Low cost, less than 2/3 of the...

Condensation is responsible for removing heat from the vicinity of the refrigerator so that the refrigerator can enter cold air. Therefore, as long as the wire tube external condenser is blocked, the heat will be concentrated, and the refrigerator will never be able to operate stably and reach the perfect temperature of the gas. Reasons for wire tube external condenser blockage 1. Ice...

The core component of the refrigerator is the evaporator, which is an important component of the alternation of cold and heat. Of course, the failure of the refrigerator evaporator is also a relatively common thing. When the evaporator fails, we need to eliminate it in time. Today, the editor will introduce to you the common faults of refrigerator evaporators, mainly including improper...

It is one of the frequent faults of refrigerators that the compressor does not stop, does not cool or has poor cooling effect due to refrigeration system leakage or blockage of the refrigeration system. Moreover, the two kinds of failure phenomena are roughly the same, which are easy to confuse. In the maintenance process, if the judgment cannot be made accurately, it will not only delay the...

Evaporator Common evaporators for double-door direct-cooling refrigerators are: blown-type evaporators for freezer compartments, plate-tube evaporators, and serpentine-tube evaporators with tank slices for freezer compartments. Finned tube evaporators for intermittent refrigerators. Most of them are made of aluminum, so the leakage failure rate is very high. From the point of view of repair, it...

The installation of the refrigerator external condenser is mostly installed directly against the back wall. This actually has a big disadvantage: the heat of the condenser tube is undoubtedly transferred to the iron sheet, and the inner side of the iron sheet is close to the insulation layer, so the heat can only be transferred outward. Although part of the heat of the iron sheet is...

Introduction of wire tube refrigerator condenser A wire tube refrigerator condenser is an essential component of any refrigerator. It is responsible for removing heat from the refrigerant, which in turn cools the interior of the refrigerator. Over time, the condenser can become clogged with dust and debris, which can reduce its efficiency and cause the refrigerator to work harder than...

As the world becomes more environmentally conscious, many businesses are looking for ways to reduce their carbon footprint. One area where this is particularly important is in refrigeration systems. These systems are responsible for a significant amount of energy consumption, and upgrading to a more efficient system can have a big impact on both the environment and your bottom line. One of the...

Wire tube refrigerator condenser are a critical component of refrigeration systems, playing a key role in the cooling process. These condensers are designed to transfer heat from the refrigerant to the surrounding air, allowing the refrigerant to condense and return to a liquid state. In this article, we will explore the science behind wire tube refrigerator condenser, including their...

Refrigerators are an essential part of our daily lives, and we rely on them to keep our food fresh and safe to eat. One of the critical components of a refrigerator is the condenser, which is responsible for removing heat from the refrigerant and releasing it into the surrounding air. In this article, we will take a closer look at the refrigerator condenser wire tube, one of the most common...